1
/
van
2
Deco Tafellamp Marella Chroom/Helder - 56 cm
Deco Tafellamp Marella Chroom/Helder - 56 cm
Normale prijs
€311,95
Normale prijs
Aanbiedingsprijs
€311,95
Belastingen inbegrepen.
Verzendkosten worden berekend bij de checkout.
Aantal
Kan beschikbaarheid voor afhalen niet laden
Deze tafellamp uit onze Marella -collectie zal je inspireren! De praktische en draagbare tafellichten kunnen flexibel worden gebruikt in verschillende delen van het huis. Ze bieden zowel gericht licht voor verschillende activiteiten als sfeermosferische verlichting om bepaalde gebieden in de kamer te benadrukken zonder de hele kamer te verlichten. Een opvallende look en een cilindrische figuur maken dit stuk in een moderne stijl een must-have voor iedereen die van een harmonieuze faciliteit houdt. De opvallende combinatie van metaal en plastic in chroom maakt deze lamp een echte oogstadder. Het verchroomde frame en het heldere transparante paraplu resulteren in een coherente eenheid en een esthetisch algemeen beeld. De afmetingen van de tafellamp bedragen 33 cm lang, 33 cm breed en 56 cm hoog. Dus de lamp heeft een diameter van 33 cm. De tafellamp heeft een snoerschakelaar en een euro platte connector. Met een lengte van 150 cm biedt de zwarte kabel voldoende reikwijdte. Met de tafellamp, uitgerust met 3 G3 -stopcontacten, om met geschikte lampen op te slaan volgens uw wensen, breng dan licht naar elke kamer. Vanwege de mogelijkheid om de lamp zelf te veranderen, ben je niet alleen flexibel, maar bespaar je ook geld. Deze lamp komt overeen met klasse 2. Dit apparaat is ontworpen voor werking op het power grid en werkt met een netspanning van 220-240V ~ 50Hz. Met een output van 120 watt is deze lamp bijzonder krachtig en efficiënt. Geef uw huis met onze hoogwaardige tafellampje de perfecte lichte sfeer en geniet van comfort en stijl in elke kamer.
Breedte: 33cm
Hoogte: 56cm
Lengte: 33cm
Gewicht: 2g
Materialen: Metaal, Plastic
EAN/streepjescode: 4003222714508
Fabrikant informatie: Näve - Leuchten Gesellschaft mit beschränkter Haftung
Austraße 5
74670 Forchtenberg DE
info@naeve.de
Veiligheidsinformatie: Safety instructions Electrical connections may only be carried out by expert staff.The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using.Attention! Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning,maintenance and replacing bulbs. Prior to starting installation work, de-energise the power line – remove the fuse and/or set the switch to “OFF. Lamps with transformers Lamps become very hot in the area of the lighting point. Therefore, never touch the lamp when it is switched on or still hot. RISK OF INJURY FROM BURNS!The bulb may be replaced only by competent personnel. Use only bulbs of the same type and voltage rating.Lamps are not toys. Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away fromchildren. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, in particular the cord or lamp socket, discontinue use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.Protection class I . This luminaire must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.Protection class II . This luminaire is particulary isolatet and must not be conectet to a protective earth-terminal.Pay attention to the fact that electric lines are not damaged during installation.Designation of connecting terminals. L – phase, N – neutral conductor, - protective conductor. The given mains voltage may not be exceeded.Minimum clearance between emitter edge and floodlighted surface >= 0,5 m.Only replace defective lamps by lamps of the same design, wattage and voltage.The care of luminaries is restricted to their surfaces. Use only a dry cloth. Wetness must not get into wiring spaces or to current-carrying parts.Plug and connection elements must be free of train and trick strength.
Breedte: 33cm
Hoogte: 56cm
Lengte: 33cm
Gewicht: 2g
Materialen: Metaal, Plastic
EAN/streepjescode: 4003222714508
Fabrikant informatie: Näve - Leuchten Gesellschaft mit beschränkter Haftung
Austraße 5
74670 Forchtenberg DE
info@naeve.de
Veiligheidsinformatie: Safety instructions Electrical connections may only be carried out by expert staff.The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using.Attention! Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning,maintenance and replacing bulbs. Prior to starting installation work, de-energise the power line – remove the fuse and/or set the switch to “OFF. Lamps with transformers Lamps become very hot in the area of the lighting point. Therefore, never touch the lamp when it is switched on or still hot. RISK OF INJURY FROM BURNS!The bulb may be replaced only by competent personnel. Use only bulbs of the same type and voltage rating.Lamps are not toys. Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away fromchildren. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, in particular the cord or lamp socket, discontinue use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.Protection class I . This luminaire must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.Protection class II . This luminaire is particulary isolatet and must not be conectet to a protective earth-terminal.Pay attention to the fact that electric lines are not damaged during installation.Designation of connecting terminals. L – phase, N – neutral conductor, - protective conductor. The given mains voltage may not be exceeded.Minimum clearance between emitter edge and floodlighted surface >= 0,5 m.Only replace defective lamps by lamps of the same design, wattage and voltage.The care of luminaries is restricted to their surfaces. Use only a dry cloth. Wetness must not get into wiring spaces or to current-carrying parts.Plug and connection elements must be free of train and trick strength.
Delen
