LED Plafondlamp Malou Rookglas - Ø 45 cm

De LED-plafondlamp "Malou" combineert een speciaal ontwerp met stijlvolle elegantie, het nobele rookglas in combinatie met metaal en de gebogen, LED-bogen maakt het ook een interessante blikvanger in elke kamer. Het schenkt zacht, dimbaar licht dat flexibel kan worden aangepast aan uw behoeften. Gebruik CCT -functie om te kiezen tussen warm, neutraal of koel licht en maakt dus de perfecte verlichting voor elke vereiste mogelijk. De Night Light -functie zorgt voor gedempt licht 's nachts en dus meer veiligheid, dankzij de geheugenfunctie, wordt de laatste instelling opgeslagen en bespaart dus de vaak irritante nieuwe aanpassing.
Breedte: 45cm
Hoogte: 23.5cm
Lengte: 45cm
Materialen: Metaal, Glas
EAN/streepjescode: 4003222892763

Fabrikant informatie: Näve - Leuchten Gesellschaft mit beschränkter Haftung
Austraße 5
74670 Forchtenberg DE
info@naeve.de
Veiligheidsinformatie: Safety instructions Electrical connections may only be carried out by expert staff.The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using.Attention! Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning,maintenance and replacing bulbs. Prior to starting installation work, de-energise the power line – remove the fuse and/or set the switch to “OFF. Lamps with transformers Lamps become very hot in the area of the lighting point. Therefore, never touch the lamp when it is switched on or still hot. RISK OF INJURY FROM BURNS!The bulb may be replaced only by competent personnel. Use only bulbs of the same type and voltage rating.Lamps are not toys. Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away fromchildren. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, in particular the cord or lamp socket, discontinue use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.Protection class I . This luminaire must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.Protection class II . This luminaire is particulary isolatet and must not be conectet to a protective earth-terminal.Pay attention to the fact that electric lines are not damaged during installation.Designation of connecting terminals. L – phase, N – neutral conductor, - protective conductor. The given mains voltage may not be exceeded.Minimum clearance between emitter edge and floodlighted surface >= 0,5 m.Only replace defective lamps by lamps of the same design, wattage and voltage.The care of luminaries is restricted to their surfaces. Use only a dry cloth. Wetness must not get into wiring spaces or to current-carrying parts.Plug and connection elements must be free of train and trick strength.